QDT‑1™ is a quick-deployment field tripod for seasonal and temporary deployments of weather station and hydrology equipment for aviation, wild fire, athletic event, and environmental data collection.
Tripod‑1™, Constructed of machined and welded aluminum, uses a modular construction for versatile field configurations. Adjustable leg extensions allow for accurate and stable positioning on sloped and uneven ground. Maximum mast heights exceed 15 ft (4.8 m).
QDT-1 Tripod
Quick-Deployment Tripod
Tripod-1
Weather Station Tripod
Features
Quick-Deployment Tripod
QDT-1™ is a rugged field tripod designed for rapid deployment in unimproved areas.
The tripod is suitable for temporary or seasonal installations of meteorology, hydrology, or lighting equipment.
QDT-1 is a practical solution for aviation fly-ins, athletic events, and similar activities that require temporary equipment installations. The wide stance and adjustability facilitate deployments on un-even surfaces.
QDT-1 deployment can be done in a few seconds and requires no tools.
Feature Summary
- Tool-less assembly
- Field serviceable
- Adjustable leg extensions (up to 12% slope)
- Rugged
- Wide, stable stance
- Light weight
Key Features
Construction
QDT‑1™ is made of 5052 and 6061 aluminum, steel fasteners, and nylon slide components.
Assembly Tools
No tools required, except for a hammer for ground stakes.
Configuration
QDT-1™ is currently only available in one configuration.
Weather Station Tripod
Tripod‑1™ is a portable, lightweight mounting structure suitable for temporary and permanent equipment installations. It is made of machined and welded 6061 aluminum.
To improve electrical grounding and to minimize cost, Tripod‑1 is un-anodized. For use with systems that will be handled frequently, contact Dyacon for anodizing options.
Feature Summary
- Minimal tool assembly
- Field serviceable
- Adjustable leg extensions (up to 13% slope)
- Modular construction
- Versatile configuration
Key Features
Construction
Tripod‑1™ is made of 6061 machined and welded aluminum. The mast is constructed of 1” (1.32”/33.5 mm) pipe, which is compatible with standard structural pipe fittings.
Spring buttons lock each segment, and a quick-release pin secures the mast in the elevated position (as pictured).
Standard wire rope clips are used for the stainless steel wire rope guy lines. Guy lines are typically attached to the legs, but may be attached to stakes or other structures.
316 stainless steel D-shackles and turnbuckles make guy line tensioning fast and secure.
Assembly Tools
A 7/32 inch (5.5 mm) open-end wrench is included to adjust the guy cable clips.
Additional tools may be required for anchoring stakes or screws, depending on installation location.
Configuration
Tripod-1™ is available in 6- (standard), 7-, and 10‑segment configurations.
The mast may be suspended in the tripod hub (as pictured), or it can rest on the ground for additional load-bearing capacity. A center anchor foot is available.
Guy cables can be attached to the legs for portability and minimal installation area, or they can be staked separately.
Each leg has an adjustable extension and a large foot. Holes are provided for 1/2” rebar or 3/8” screws.
Extra large feet attachments are available for installations in loose, sandy, or snowy terrain.
Downloads
Download Stevens'
Product Catalog
Enter your name and email address to receive a link to the PDF version of the Stevens Product Catalog. You will be subscribed to the Stevens Water newsletter (you can unsubscribe any time).
Shop & Inquire
Need more information? We’re here to help!
Tell us a bit about yourself and your question and we’ll get back to you ASAP.
