Dyacon Accessories
Power Distribution Block
PDB-1 was designed for low-power weather station applications with multiple batteries or loads.
20 W Upgrade with 9 Ah battery
Solar Panel Upgrade Kit is an upgrade to the standard power system of Dyacon MS-100 weather stations. It is easy to install on weather stations in northern latitudes or other areas where additional power is needed.
Modbus Junction Box 2
MJB-2™ is a passive junction box that provides parallel connections for five Modbus RTU slave devices and one master. Data and power are connected in parallel. Biasing, termination, and transient protection are included.
Weather Station Control Module and Datalogger
CM‑1BTM Weather station control module integrates all weather station hardware into a single circuit board including datalogger, solar charge controller, and embedded cell phone. CM‑1B is an easy-to-use professional weather station controller used for all Dyacon weather stations.
Aspirator Radiation Shield Kit For TPH Sensors
Keep your air temperature sensor cool with the Aspirator Fan upgrade option to Dyacon Temperature-Pressure-Humidity sensors. Kit may also be used to upgrade units in the field.
USB to Modbus-RTU
USB to Modbus-RTU Converter for use with Dyacon WSD and TPH sensors and Dyacon weather station controllers.
10 W and 20 W Solar Panels
Solar panels for low-power or remote power equipment, including weather instruments, lighting, and other autonomous equipment. These are the same panels used for Dyacon weather stations.
Solar Power Upgrade Kit
10 W solar power upgrade kit for Dyacon MS-120 wired weather station configurations.
Modbus Bias Module
MBM-1™ eliminates Modbus RS-485 floating pin errors. Dyacon Modbus Bias Module was designed to provide specific pull and termination resistors in a rugged, convenient package.
Aspirated Radiation Shield
Aspirated Radiation Shield, RADShield-2™ minimizes the effects of solar heating on air temperature sensors. Heated air is drawn away from the temperature sensor and discharged at the other end of the mounting pipe.
2W Low-Power Regulator
RLP‑2W™ is a linear regulator that provides clean 12 VDC output in solar power and 24 V automation systems. The regulator can also be used as a solid-state switch for connected devices.
12 V 8.5-9 Ah VRSLA Battery
12 V 8.5-9 Ah VRSLA Extended Temperature Battery for Dyacon weather station controllers and similar solar powered equipment.
Machine-to-machine Cell Phone Data Plans 5 MB and SMS
M2M (IoT) data and SMS text message service for Dyacon weather stations and similar equipment. US domestic and North America options.
Need more information? We’re here to help!
Tell us a bit about yourself and your question and we’ll get back to you ASAP.
