The Stevens SDX (Submersible Depth Transmitter) is a pressure sensor that delivers accurate results while still remaining very affordable for a wide range of level measurement applications.

High impact, corrosion-resistant PVC Type II housing and potted electronics make the SDX extremely durable for most water and hostile fluid environments. The SDX is also an excellent choice for level measurement applications that may put more expensive sensors at risk for damage.

The SDX comes equipped with user specified vented cable lengths. The vent provides an atmospheric reference for the sensor, which is necessary for ensuring the highest possible accuracy when making a level measurement.

The SDX features one 4-20 mA analog output signal that corresponds linearly to range. Compatible with existing power and data logging instruments, the SDX can easily be deployed for data collection at remote monitoring sites.

The sensor housing integrates pipe threads for securely mounting the SDX into pipes, tanks, or other applications.

  • Rugged housing and fully potted electronics—not damaged by freezing water
  • Compact size
  • Accuracy of ± 0.25% full span
  • Analog output (4-20 mA)
  • Vented cable, 2 wire, with drain
  • Weighted copper nose cone

Optional Desiccant Cartridge

The SDX is a “Wet-Wet” device. While it is important to keep the SDX cable’s vent tube unobstructed for barometric pressure compensation, neither the pressure transducer nor internal electronics are damaged by condensation or moisture entering the vent tube. For best results, Stevens recommends the desiccant cartridge with vent tube adapter.

Technical Specifications

Power requirements9 - 26 VDC
Output4-20 mA current signal, linearly corresponding to range
Operating temperature-40° F to 185° F (-40° C to 85° C)
Compensated temperature32° F to 122° F (0° C to 50° C)
Linearity0-2.5 ft range: 0.2% max.
0-5 ft range: 0.2% max.
0-10 ft range: 0.2% max.
0-35 ft range: 0.3% max.
0-50 ft range: 0.3% max.
(0.1% typical for all ranges)
Repeatability & hysteresisTypical: ± 0.2% span
Reverse polarity protectionBuilt into sensor
Overpressure0-2.5 ft: 20 psi max.
0-5 ft: 20 psi max.
0-10 ft: 20 psi max.
0-35 ft: 45 psi max.
0-50 ft: 45 psi max.
ShockQualification tested to 150 g
WiringRed: power
Green: 4-20 mA return
Silver: drain wire
Pipe threading1/2-14 straight pipe thread (back of sensor housing near cable)
3/8-18 straight pipe thread (under removable copper nose-cone)
Physical size4.00" L x 0.84" dia. (101.6 mm L x 21.33 mm dia.)
WeightProbe: 2.37 oz (61.19 g)
Cable: 0.43 oz (12.19 g) per foot (.4 g per cm)
(weights are approximate)

Downloads

Download Stevens'
Product Catalog

Enter your name and email address to receive a link to the PDF version of the Stevens Product Catalog. You will be subscribed to the Stevens Water newsletter (you can unsubscribe any time).

Product Catalog download

Shop Online / Inquire

Need more information? We’re here to help!​

Tell us a bit about yourself and your question and we’ll get back to you ASAP.

General inquiry